DANLY - European Union Trademark Information

The trademark registration for DANLY was filed on September 5, 2011, and it was registered on April 23, 2012 under EUTM trademark no. 010240406.

The trademark is owned by DANLY INTERNATIONAL, INC. and represented by 2K PATENTANWÄLTE BLASBERG, KEWITZ & REICHEL, PARTNERSCHAFT MBB (EUIPO registered representative, ID no. 23265) as a holder of a trademark.

There were no oppositions raised during the publication period. The 90 day opposition period for this mark started on January 13, 2012.

Trademark registration is in force until September 5, 2021.

TRADEMARK INFORMATION
Trademark Name DANLY Trademark No. 010240406
Type Figurative Status Registered
Filling Date September 5, 2011 Registration Date April 23, 2012
NICE Classes 6, 7, 8 Basis EUTM
Reference 11341LEYMKEM Status Date April 25, 2012
Owner Information
Owner DANLY INTERNATIONAL, INC.
Owner ID 393604
Legal Status Legal entity
Country US
Address DANLY INTERNATIONAL, INC.
333 Progress Road
Dayton, Ohio 45449
UNITED STATES
Representative Information
Representative 2K PATENTANWÄLTE BLASBERG, KEWITZ & REICHEL, PARTNERSCHAFT MBB
Representative ID 23265
Legal Status Legal person
Country DE
Address 2K PATENTANWÄLTE BLASBERG, KEWITZ & REICHEL, PARTNERSCHAFT mbB
Schumannstrasse 27
D-60325 Frankfurt am Main
GERMANY
NICE CLASS Descriptions
Class Class Description
6
Metals, metal castings, Locks, Safes, Hardware

Common metals and their alloys; small items of metal hardware; goods of common metal not included in other classes; pipes and tubes of metal; clamps, screws, set screws, cap screws, head screws, pins, ejector pins, stripper guides, springs, die springs, gas springs, dies, shanks, punch shanks, swivel adaptors, laps, arbors, pry bars, cutter bards, dowels and dowel pins, pressing markers, pressing springs, connecting clips, jointed clips, bushings, guide bushings, guide posts, guide plates, guide bars, bolster plates, wear plates and wear strips, bolts, lifting bolts, mount retainers, hoist rings, plugs, casings for mounts, matrixes, guide bar jacks, mould sets, mould pins, in-die tapping units and taps, all made of metal.

7
Machines and Machine Tools, Parts

Machines and machine tools; motors and engines (except for land vehicles); pressing and die stamping machines, tools and their parts, sheet metal forming machines, tools and their parts; conveyers, press feeds, die mount cams, hydro-cams, cam drives, in-die tapping machines and taps, pneumatic toggle presses, lubrication apparatus, forming and bending apparatus, stock punchers, roller stock guides, strippers, levers, tensioning pieces for turned parts, binding tools, chucks [parts of machines], power presses, die sets, punches and punch shanks; tool maker supplies not included in other classes, namely steel bushings, bronze bushings, bronze plated bushings, guide posts, mold pins, wear plates, wear strips, wear ways, gib assemblies, keeper blocks, slide gibs, guide blocks, keeper plates, guide plates, lifter pins, pad retainers, spring cages, spring guards, spring retainers, V-blocks, U-blocks, center keys, L-gibs, pad retainers, spools, stop blocks, kiss blocks, lifter pins; aerial and die mount cams, modular cams, roller cams, bump cams and box cams all for use in sheet metal forming machines.

8
Hand Tools and implements, Cutlery

Hand operated tools and implements; chucks [parts of hand-operated tools]; clamps, punches, pry bars, strippers, forming and bending tools, in-die tapping units and taps, stock pushers, press feeds.

Disclaimer: The information provided on this page is considered public information by the European Union Intellectual Property Office and is provided for informational purposes only. It should not be construed as legal advice on any subject matter.